Small, functional powerbank. Baseus Picogo QI2 5000 MAH 20W – review

With powerbanki it is so that you would like as low as possible, but with the largest capacity. In the case of network chargers, GAN technology helped here, which allowed to significantly reduce the size of the charger, while increasing performance and retaining safety standards. Unfortunately, this is not the case with powerbanki, they have become a little more compact, but more focused on functionality here. They load faster, they can charge wirelessly and so on. Recently, I came to some accessories from the new Baseus Picogo series and the first I tested is the Powerbank Baseus Picogo Qi2 with a capacity of 5000 mAh. What can he

A small powerbank with several functions

The first thing that catches the eye and what you feel when you take this powerbank in your hand is indeed its small size. Without any great records, but it is small and handy, and the closest to which you can compare this box with cards for playing. The first one occurred to me. It weighs about 170 grams and it would probably be much less if it wasn't for the metal and really solid construction. Let's agree, such a weight with a capacity of 5000 mAh does not impress at all. There are not much heavier powerbanki, like the Green Cell Powerplay 10 tested by me a few years ago, which is 10,000 mAh, but in turn is all plastic. Here they went towards a higher quality, but also a certain compromise, so that the powerbank is convenient, he did not weigh more than a smartphone, which he charges and gave at least one full charging. We can easily put it in your pants pocket, slide it somewhere in the backpack or we will use it fairly comfortably when it is “glued” to the back of the smartphone (about which below).Baseus Picogo Qi2 5000 I have to admit that it appears visually to me. This model Baseus Picogo Qi2 is elegant, it looks solid and made of good materials. You can immediately feel that it is metal. It's really very good in this respect. What doesn't suit me? You will say that I pick on, but as an zealously pedantic person, I sniff a bit that the metal part of the housing quickly collects greasy dirt, and the matte top, not only that it gets dirty, it is also susceptible to scratches. And seriously, I don't know where and where, but in three points I see abrasions that were not there yesterday.

Baseus Picogo QI2 charges wired and wirelessly, supports Magsafe and Qi2.

I mentioned that the powerbank is small and functional. I have already written about his physical qualities, so now I will focus on what is hidden under the word “functional”. Baseus Picogo QI2 can charge the device wired, but also inductively. Wired, because it has one USB-C, which is used for charging the powerban, but also the device connected to it. The latter option is related to the fact that Powerbank supports wireless charging in the Qi2 standard with a maximum power of up to 15 W. It is also not directly written, but you can immediately find out after all press graphics that Powerbank also supports Magsafe from Apple. So, at least in theory, it can be written that it is the perfect equipment under the iPhone from model 15 up. We have magnetic charging and the latest Qi2 standard.A useful solution here is also a tilted and rotating leg. Powerbank can be “attached” to the smartphone and put it vertically or horizontally during charging. And you know what? This works a lot, and the metal support and mechanism are really solid and certain in action.

Baseus Picogo Qi2 I checked with Pixel 9 Pro

And now yes. Baseus Picogo Qi2 I did not test with an iPhone, because I did not have any nearby, and Google Pixel 9 Pro, which also supports wireless charging, but does not support the Qi2 standard. Or otherwise, you can attach it to the powerbank, but it probably doesn't hold as well as an iPhone. Pixel grabs every time in the same place and we can even raise it together with the PowerBank when the devices are horizontally. In the Powerbank vertical, he will immediately move under its weight and unhook. And here again the topic of the support appears, because I most often used wireless charging by putting a powerbank with a phone as in the photo below.Baseus Picogo QI2 5000 Mahi now a handful of wireless charging data. Pixel, which had 27%, I attached to a fully charged powerbank at 19:30. After about 2 hours and 20 minutes he had 61%, and after another hour he reached 79%. I noticed that the charging was interrupted, after applying the phone to the powerbank, he did not respond to charging, and after pressing the button, one diode shone on the powerbank and blinked several times. It was then known that the powerbank was discharged. Let me remind you that the battery in Pixel 9 Pro has 4700 mAh, so it turns out that the losses when induction charging are noticeable. Pixel 9 Pro connected on the cable loaded with the power of 18-19 W (~ 9V and 2.1A), as can be seen in the photo below. The phone, which was 25%, I connected to full power bank at 23:00. After about 50 minutes, the battery in the phone was charged to 77%, and two lines remained on the Powerbank. The phone stopped charging, but it is probably because the adaptive charging was set. I connected to a second phone (Samsung Galaxy A54), which was 61%. With 68% only one line on the power bank was shining. He topped up to 76% and the powerbank was already empty.When you use wired charging, the powerbank automatically cuts wireless charging so that charging on the cable is as soon as possible. However, wireless charging can be turned on by pressing the power button twice (e.g. when we want to recharge your smartphone and wirelessly smartwatch or headphones located on a powerbank), but I personally do not recommend doing it. For two reasons. When I charged both devices (Galaxy A54 and Huawei Watch GT 3), only about 6.7 W went to the smartphone. When I disconnected the watch, the power increased to 14 W. Besides, the smartwatch heated heating up and after a few minutes I displayed a message about overheating. There is only info that USB Input can have 5V-3A and 9V-2A (15 W and 18 W, respectively).

This powerbank costs PLN 159

This powerbank cannot be denied, because it supports the latest Qi2 wireless charging, gets along with devices that have Magsafe, and a few pennies are added to practicality. In addition, this Baseus Picogo is mega well made, compact and does what it belongs to. It is a pity that it has only 5000 mAh (although otherwise it would not be so compact) and in the present time it will not provide even one fully charging battery on the smartphone.Baseus Picogo QI2 5000 MAHPOWERBANK Baseus Picogo QI2 costs PLN 159. And not only because of the capacity of the links, I think the price is high. The greatest impact on the price here has support for the latest QI2 standard. It is widely known that you pay for new products and this is a good example. So if we care about it the most – we will overpay. However, if we are enough for the Qi standard and we give up the stand, we will find even a Magnetic Mini model with the same capacity (and also with 15 in wireless charging), but for almost half less. If I had to buy for myself, I would choose the second scenario.

---

Test equipment was provided by the manufacturer as part of barter cooperation. Nobody had the least influence on the content of this text and our opinion. Mocked pages and well -made Qi2Wsparta for Magsafewbuded Solid Solid Tribunal Charging Two devices at the same time (but slower) weakness, all, only 5000 mahz, highly high price for dirt and scratches